이 글을 보시게 된다면IBM인증 000-994시험패스를 꿈꾸고 있는 분이라고 믿습니다. IBM인증 000-994시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의IBM인증 000-994덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의IBM인증 000-994덤프는 고객님께서 IBM인증 000-994시험을 패스하는 필수품입니다.
ITExamDump 에서 제공해드리는 IBM 000-994덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 IBM 000-994 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히IBM 000-994시험을 패스할 수 있도록 최선을 다하고 있습니다.
ITExamDump의IBM인증000-994자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는IBM인증000-994시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
IBM인증 000-994시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. IBM인증 000-994인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 IBM인증 000-994덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전IBM인증 000-994무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.
꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. IBM인증 000-994시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. ITExamDump의 IBM인증 000-994덤프는IBM인증 000-994시험에 대비한 공부자료로서 시험적중율 100%입니다.
ITExamDump는 여러분이 빠른 시일 내에IBM 000-994인증시험을 효과적으로 터득할 수 있는 사이트입니다.IBM 000-994덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서IBM 000-994관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의IBM 000-994덤프로 자신 있는 시험준비를 하세요.
시험 번호/코드: 000-994
시험 이름: IBM (IBM WebSphere MQ V6.0,System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-02-19
멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. IBM인증 000-994시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의IBM인증 000-994덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의IBM인증 000-994덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.
000-994 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-994.html
NO.1 What userid or group always has access to all WebSphere MQ Objects on UNIX platforms?
A.mqadmin
B.wmqadmin
C.mqm
D.root
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.2 What attribute is required on the ALTER CHANNEL(Channel Name) command?
A.CONNAME
B.CHLTYPE
C.TRPTYPE
D.XMITQ
Correct:B
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.3 The message flow performance between two Queue Managers is slower than expected. An
application is using a MQPUT call with parameter "MQPER_PERSISTENCE_AS_Q_DEF". The
messages are put onto a local Remote Queue. The properties are detailed below. The Application
messages are not required to survive system failures or restart of the queue managers. dis
qremote('MyAppQueue') all AMQ8409: Display Queue details. QUEUE(MyAppQueue)
TYPE(QREMOTE) ALTDATE(2005-09-21) ALTTIME(13.10.46) CLUSNL( ) CLUSTER( ) CLWLPRTY(3)
CLWLRANK(3) DEFBIND(OPEN) DEFPRTY(5) DEFPSIST(YES) DESCR( My Application Message
Queue on Remote Server) PUT(ENABLED) RQMNAME( ) RNAME(MyAppQueue) SCOPE(QMGR)
XMITQ(QM2) What is the best MQSC command the WebSphere MQ Administrator can use to
improve the message flow performance between the two Queue Managers?
A.No command is valid, as this is an application tuning issue.
B.ALTER QREMOTE('MyAppQueue') CLWLRANK(9)
C.ALTER QREMOTE('MyAppQueue') DEFPRTY(9)
D.ALTER QREMOTE('MyAppQueue') DEFPSIST(NO)
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.4 The registry entries of a Windows Queue Managers named 'QM2' have been corrupted. While
attempting to start QM2, WebSphere MQ is unable to read the "LogPath' stanza. If WebSphere MQ
is installed in the \IBM\WebSphere MQ\ directory, then in which directory will the AMQERR01.LOG
be updated as error messages are generated?
A.In the \var\mqm\qmgrs\QM2\errors subdirectory
B.In the \IBM\WebSphere MQ\qmgrs\@SYSTEM\errors subdirectory
C.In the \IBM\WebSphere MQ\errors subdirectory
D.In the \IBM\WebSphere MQ\qmgrs\QM2\errors subdirectory
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.5 What service object can utilize the MQSC script command DISPLAY SVSTATUS to display the
status of running service objects?
A.COMMAND object
B.LISTENER object
C.SERVER object
D.QUEUE object
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.6 What is the best way to protect WebSphere MQ message data from being read by unauthorized
parties while it travels over an unsecured network?
A.Configure the WebSphere Channels to use SSL security
B.Allow only locally binding applications instead of WebSphere MQ Clients
C.Set the "MQSNOAUT" variable to FALSE
D.WebSphere MQ data can never be read by unauthorized parties
Correct:A
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.7 A company has a Queue Manager configured with Linear Logging enabled. The log files are
mounted on a separate disk, the old log files are regularly archived to ensure sufficient disk space.
What procedure should the WebSphere MQ Administrator follow after altering an empty local
queue to ensure this change is not lost by a media failure before the Queue Manager is next
restarted?
A.Recreate the Queue Manager to use Circular Logging.
B.Increase the frequency of the regularly archiving of the log files.
C.Media images are recorded automatically by the Queue Manager, the WebSphere MQ System
Administer does not need a procedure.
D.Use the control command to record the new local queue's definition.
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.8 A WebSphere MQ System Administrator desires to change the location of the log files only for
existing UNIX Queue Manger "saturn.queue.manager". The new location of the log files is to be
"/home/mqm/logs". What is the best way to accomplish this task?
A.Edit file /var/mqm/mqs.ini so "LogDefaultPath=/home/mqm/logs"
B.Edit file /var/mqm/qmgrs/saturn!queue!manager/qm.ini so "LogPath=/home/mqm/logs"
C.Issue control command "amqmdain reg saturn.queue.manager -c add -s Log -v LogPath value
=/home/mqm/logs"
D.Issue the control command "crtmqm saturn.queue.manager -ld /home/mqm/logs"
Correct:B
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.9 A Unix Server has just restarted after a media failure. When the queue manager startup
command was entered, the error message "QUEUE MANAGER UNAVAILABLE" was returned.
Which of the following is the most likely cause of the problem?
A.The mqs.ini does not reference the queue manager with the correct information for locating its files.
B.During the media failure, the Queue Manager was dropped from the queue-sharing group.
C.During the media failure, the Queue Manager was suspended from processing messages.
D.The 'mqm' User Group was damaged during the media failure.
Correct:A
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.10 Which parameter setting on the server connection channel requires a WebSphere MQ Client
application to have personal digital certificates?
A.CONVERT(YES)
B.SECURITY(YES)
C.SSLCAUTH(YES)
D.SSLCAUTH(REQUIRED)
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.11 A trigger monitor needs to be started and stopped when the queue manager starts and ends.
Where in the WebSphere MQ Explorer V6.0 tooling can this trigger monitor service be defined?
A.On the advanced tab
B.On the listeners tab
C.On the queue manager properties
D.On the services tab
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.12 Within a WebSphere MQ based application, all of the following types of reports are available
EXCEPT:
A.Confirm on Arrival (COA)
B.Confirm on Delivery (COD)
C.Receiving Application Processing (RAP)
D.Expiry
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.13 An AIX WebSphere MQ queue manager 'QM1' owns a channel 'QM1.TO.QM2'. The parameters of
the channel are as follows: CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) ALTDATE(2005-09-26)
ALTTIME(16.51.53) BATCHHB(0) BATCHINT(0) BATCHSZ(50) COMPHDR(NONE) COMPMSG(NONE)
CONNAME(QM2) CONVERT(NO) DESCR(Sender Channel to QM2) DISCINT(6000) HBINT(300)
KAINT(AUTO) LOCLADDR( ) LONGRTY(999999999) LONGTMR(1200) MAXMSGL(4194304)
MCANAME( ) MCATYPE(PROCESS) MCAUSER( ) MODENAME( ) MONCHL(QMGR) MSGDATA( )
MSGEXIT( ) NPMSPEED(FAST) PASSWORD( ) RCVDATA( ) RCVEXIT( ) SCYDATA( )
SCYEXIT(svr_sec_exit2(ChannelExit))) SENDDATA( ) SENDEXIT( ) SEQWRAP(999999999)
SHORTRTY(10) SHORTTMR(60) SSLCIPH( ) SSLPEER( ) STATCHL(QMGR) TPNAME( )
TRPTYPE(TCP) USERID( ) XMITQ(QM2) The remote server has just been upgraded and the Queue
Manager rebuilt. Unfortunately, all of the WebSphere MQ objects where only defined with the
default parameters. The 'QM1.TO.QM2' channel is started and its status is "RETRYING". Which of
the following actions is most likely to correct the problem with the channel pair?
A.Set the receiver channel's message channel agent user attribute correctly
B.Set the receiver channel's CipherSpecs attribute correctly
C.Set the receiver channel's Security Exit attribute correctlyC.Set the receiver channel's Security Exit
attribute correctlyC.Set the receiver channel's Security Exit attribute correctly
D.Clear all messages from the QM2 Transmission QueueD.Clear all messages from the QM2
Transmission QueueD.Clear all messages from the QM2 Transmission Queue
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.14 An application development team is coding a tool to send PCF commands to a WebSphere MQ
Queue Manager on HP-UX . The new tool is to administer WebSphere MQ, but the application
developers do not want to write PCF messages and require an easy method of handling error
conditions. What is the best IBM provided application programming interface called to perform
this function?
A.WebSphere MQ Administration Interface
B.Message Queuing Interface
C.Application Messaging Interface
D.PCF Programming Interface
Correct:A
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.15 Which command will reload the copy of the key repository which is held in memory, without
restarting a channel process?
A.REFRESH SECURITY TYPE(KEY)
B.REFRESH SECURITY TYPE(SSL)
C.RESET SECURITY TYPE(KEY)
D.RESET SECURITY TYPE(SSL)
Correct:B
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.16 Which two of the following are services provided by the SSL features of WebSphere MQ?
A.Confidentiality
B.Application-Level Security
C.Message Compression
D.Data Recovery
E.Data Integrity
Correct:A E
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.17 A LINUX Queue Manager was in the middle of processing a large unit of work when the server's
power supply was interrupted. The power problem has been repaired and the server has restarted.
What will the WebSphere MQ System Administrator need to do to ensure any uncommitted
Persistent Messages are processed?
A.Contact the application team and ask them to resend the last batch of messages
B.Use the CHECKPT function to add or delete a record in the BSDS checkpoint queue
C.Delete the Log records written since the last checkpoint
D.Nothing, as the uncommitted persistent messages put or got in a transaction are rolled back during
restart
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.18 A company is using only WebSphere MQ V6.0 in their complex distributed network. All
messages sent by one application are missing. The WebSphere MQ administrator suspects that
due to an application programming error, the messages are caught in an infinite loop. Which of
the following methods will best help the WebSphere MQ administrator track down the missing
messages?
A.Use Trace-route messaging
B.Enable Activity recording
C.Run the strmqtrc control command to enable tracing on all Queue Managers
D.Check all the Dead Letter Queues on all the Queue Managers
Correct:A
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.19 Which commands would disable the Object Authority Manager on AIX for Queue Manager
"BROADWAY"?
A.endmqm -c BROADWAY; export MQSNOAUT=yes; strmqm BROADWAY;
B.strmqm BROADWAY; export MQSNOAUT=yes
C.export MQSNOAUT=yes; crtmqm BROADWAY
D.export MQSNOAUT=yes; strmqm BROADWAY
Correct:C
IBM기출문제 000-994 000-994기출문제 000-994시험문제
NO.20 A WebSphere MQ System Administrator enters this MQSC command "dis
chstatus(QM1.TO.QM2)" on a UNIX Queue Manager and receives this output. AMQ8417: Display
Channel Status details. CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) CONNAME(QM2) CURRENT
RQMNAME( ) STATUS(RETRYING) SUBSTATE( ) XMITQ(QM2) Administrator needs to locate more
detailed information on the reason for the retrying channel status? Where can this information be
found?
A.In the system error log directory
B.In the log file AMQERR04.LOG
C.In the log file MQERRLG1
D.In the appropriate queue manager's errors log files
Correct:D
IBM기출문제 000-994 000-994기출문제 000-994시험문제
ITexamdump의 EX0-101덤프의 VCE테스트프로그램과 HP2-Z24덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-484시험에 대비한 고품질 덤프와 000-596시험 최신버전덤프를 제공해드립니다. 최고품질 C_FSUTIL_60시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기