Symantec 자격증 ST0-12W 시험문제와 답

많은 사이트에서Symantec 인증ST0-12W 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은Symantec 인증ST0-12W시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서

ITExamDump의 Symantec인증 ST0-12W덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Symantec인증 ST0-12W시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

여러분은 우리. ITExamDump의Symantec ST0-12W시험자료 즉 덤프의 문제와 답만 있으시면Symantec ST0-12W인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.

Symantec ST0-12W 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Symantec ST0-12W시험대비 덤프는Symantec ST0-12W시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.

ITExamDump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump의 Symantec인증 ST0-12W덤프는 업계에서 널리 알려진 최고품질의Symantec인증 ST0-12W시험대비자료입니다. Symantec인증 ST0-12W덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. ITExamDump의Symantec인증 ST0-12W덤프를 구매하시면 밝은 미래가 보입니다.

ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한Symantec인증ST0-12W시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리Symantec인증ST0-12W덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.

시험 번호/코드: ST0-12W
시험 이름: Symantec (Veritas Cluster Server 5 for Windows (STS))

ST0-12W 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-12W.html

NO.1 Four servers available for clustering are located in two buildings. Each building contains two servers
and the servers are on the same network. There are two disk arrays to which all four servers have shared
data access. Which type of cluster topology is required?
A. campus cluster
B. global cluster
C. shared nothing cluster
D. split brain cluster
Answer:A

Symantec인증   ST0-12W dump   ST0-12W dump   ST0-12W   ST0-12W dumps   ST0-12W기출문제

NO.2 What is the Veritas Cluster Server term for how a system joining an existing cluster retrieves the cluster
configuration?
A. remote build
B. local build
C. onetime build
D. initial build
Answer:A

Symantec   ST0-12W시험문제   ST0-12W자격증   ST0-12W   ST0-12W

NO.3 What is the Veritas Cluster Server service that maintains resource configuration and state
information?
A. h~d
B. hastate
C. haconf
D.hacf
Answer: A

Symantec   ST0-12W기출문제   ST0-12W   ST0-12W   ST0-12W

NO.4 Which command do you use to change a service group attribute in a running cluster?
A. h~grp ?modify
B. hagrp ?change
C. hamodify ?group
D. hamodify ?attribute
Answer:A

Symantec pdf   ST0-12W   ST0-12W   ST0-12W인증

NO.5 Which three elements must be moved from the failed server to the takeover server for network users to
resume access to the database when a failover occurs? (Choose three.)
A. the vtrtuat ts address
B. the set of processes
C. the Ethernet address
D. the public key
E. the disk group
Answer:A,B,E

Symantec pdf   ST0-12W   ST0-12W pdf

NO.6 You are designing a high availability solution for an important new application and you are in the
process of identifying single points of failure in the design. What are two possible single points of failure
that can be addressed by Veritas Cluster Server? (Choose two.)
A. network
B. stor~ge
C. processors
D. memory
E. environment
Answer:A,B

Symantec덤프   ST0-12W   ST0-12W pdf

NO.7 A process is manually shut down to test an automatic failover of a configured Process resource. The
service group then fails over to another system. What should be cleared before bringing the service group
back to the system on which the test was originally conducted?
A. resource
B. attribute
C. cluster
D. system
Answer:A

Symantec   ST0-12W pdf   ST0-12W   ST0-12W자격증   ST0-12W

NO.8 Which Symantec product feature or attribute allows for the same application to be started
simultaneously on different systems?
A. parallet service groups
B. Veritas FlashSnap
C. the online local dependency
D. the parallelstart group attribute
Answer:A

Symantec   ST0-12W dump   ST0-12W최신덤프   ST0-12W자료

NO.9 What are three possible types of Veritas Cluster Server service groups? (Choose three.)
A. Failover
B. Hybrid
C. Parallel
D. Singlenode
E. OnOnly
Answer: A,B,C

Symantec   ST0-12W   ST0-12W   ST0-12W pdf   ST0-12W기출문제

NO.10 You have two of three systems in a cluster up and running Veritas Cluster Server. When the third
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first two systems.
How does Veritas Cluster Server handle this situation?
A. It will use the configur~tion from the first two systems.
B. It will use the configuration from the third system.
C. It will integrate the files to resolve the differences.
D. The third node will be unable to start.
Answer:A

Symantec   ST0-12W   ST0-12W dumps   ST0-12W dump   ST0-12W덤프

NO.11 Which two tasks can be performed to improve the overall fault tolerance of a Veritas Cluster Server
cluster? (Choose two.)
A. connect e ach system in the cluster to separate power sources DB. mirror the os disk of e ach system
in the cluster
C. connect a tape drive to each system in the cluster
D. add a local disk array to each system in the cluster
E. add CPUs to each node in the cluster
Answer:A,B

Symantec시험문제   ST0-12W인증   ST0-12W pdf   ST0-12W덤프   ST0-12W   ST0-12W

NO.12 Several application service groups require their own virtuallP addresses to share a single NIC on each
system in a cluster. Which agent reduces the overhead associated with monitoring the NIC’ s
status?
A. proxy
B. MultiNICB
C. NIC
D. phantom
Answer: A

Symantec   ST0-12W   ST0-12W dump   ST0-12W덤프   ST0-12W pdf

NO.13 Where are configuration changes maintained in a running Veritas Cluster Server cluster?
A. memory on ~II systems
B. disk on all systems
C. memory on quorum system
D. disk on quorum system
Answer:A

Symantec   ST0-12W   ST0-12W   ST0-12W

NO.14 You are tasked with making an existing production system highly available with Veritas Cluster Server.
You have already verified that the hardware is compatible with Veritas Cluster Server. You are now
evaluating the software on the systems for Veritas Cluster Server compatibility.
What must be verified for Veritas Cluster Server compatibility?
A. the oper~ting system version
B. the volume management software version
C. the NIC driver version
D. the file system version
Answer:A

Symantec   ST0-12W인증   ST0-12W dump   ST0-12W

NO.15 You have one of three systems in a cluster up and running Veritas Cluster Server. When the second
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first system.
What happens?
A. Verltas Cluster Server uses the one from the first system.
B. Veritas Cluster Server uses the one from the second system.
C. Veritas Cluster Server will integrate the files.
D. Veritas Cluster Server will wait for the third system.
Answer:A

Symantec dump   ST0-12W   ST0-12W   ST0-12W   ST0-12W

NO.16 You want to validate operation after installing, configuring, and starting Veritas Cluster Server. Which
two GAB ports should be shown as running? (Choose two.)
A. a
B. c
C. h
D. S
E. V
Answer:A,C

Symantec   ST0-12W인증   ST0-12W   ST0-12W인증

NO.17 You are modifying the cluster configuration while the cluster is stopped. You have edited and verified
the main.cf file on system SysA. Which command do you use to start the cluster with the new
configuration on system SysA?
A. hastart
B. haclus -rebuild .Imain .cr
C. hasys ?start SysA
D. hareconfig
Answer:A

Symantec자격증   ST0-12W   ST0-12W

NO.18 What are two valid settings for the ManageFaults service group attibute? (Choose two.) A . All
B. None
C.Priority
D. MonitorOnly
E. Manual
Answer: A,B,

Symantec dumps   ST0-12W dumps   ST0-12W   ST0-12W   ST0-12W

NO.19 Which characteristic must an application have in order to be managed by Veritas Cluster Server?
A. It must be re startable to ~ known state after failure and tattover.
B. It must be startable by a user other than the system account.
C. It must be a stateless application.
D. It must be capable of running on all systems simultaneously.
Answer:A

Symantec   ST0-12W   ST0-12W   ST0-12W

NO.20 A service group with the FaiioverPolicy set to Priority has a fault and is failing over. The group fail over
to the system with the __ .
A. lowest as siqne d value in the groups SystemList
B. highest assigned value in the groups SystemList
C. lowest number of service groups currently online
D. highest available capacity in the groups SystemList
Answer:A

Symantec덤프   ST0-12W자료   ST0-12W

ITExamDump선택으로Symantec ST0-12W시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Symantec ST0-12W관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Symantec ST0-12W덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.