000-121 덤프 IBM 자격증

IBM 000-121인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이IBM 000-121인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.

ITExamDump의IBM 000-121시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의IBM 000-121인증시험덤프로 시험패스를 보장합니다.

지금 같은 정보시대에, 많은 IT업체 등 사이트에IBM 000-121인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의IBM 000-121자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.

우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-121시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에IBM 000-121인증시험을 패스함을 보장 드립니다.

시험 번호/코드: 000-121
시험 이름: IBM (Virtualization Technical Support for IBM i -v1)

000-121 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-121.html

NO.1 A client IBM i 7.1 partition is being hosted by dual VIO Server partitions (VIOS-1 & VIOS-2). A
Shared Ethernet Adapter (SEA) has been created in order to provide Ethernet failover capability
for the IBM i partition. The IBM i partition will use the Ethernet resources of the VIO Server
partitions.
How many virtual Ethernet adapters need to be defined on the HMCI in the IBM i client, and VIO
Server partition profiles to support SEA and failover?
A. IBM i Client: 1 adapter:
VIOS-1: 1 adapter
VIOS-2: 1 adapter
B. IBM i Client: 2 adapters
VIOS-1: 1 adapter
VIOS-2: 1 adapter
C. IBM i Client: 1 adapter
VIOS-1: 2 adapters
VIOS-2: 2 adapters
D. IBM i Client: 2 adapters
VIOS-1: 2 adapters
VIOS-2: 2 adapters
Answer: C

IBM시험문제   000-121   000-121   000-121   000-121덤프

NO.2 Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What type
of adapter is required in the IBM i partition?
A. SAS disk adapter
B. Virtual SAS adapter
C. Virtual SCSI adapter
D. Fibre Channel adapter
Answer: C

IBM   000-121인증   000-121최신덤프

NO.3 A customer needs two client IBM i partitions on a 4-core Power 720, with storage hosted by
VIO Server. What is the least expensive method to manage this environment?
A. HMC
B. Virtual Partition Manager
C. Integrated Virtualization Manager
D. Systems Director Navigator for PowerVM
Answer: C

IBM   000-121덤프   000-121   000-121인증

NO.4 A customer has multiple POWERS 570 servers. The servers are controlled by multiple HMCs.
The customer is installing an additional Power 770 server in this environment but will retain their
existing HMCs. No updates to FSP or HMC levels have been made since installation of the
POWERS servers.
After reviewing the cover letters for ESP and HMC firmware levels, what updates are required to
support the addition of the new server into the network?
A. Update only the HMCs to the latest version.
B. Update only the FSPs to the latest release available.
C. Update the FSP5 and HMC5 of the existing systems to the minimum level required.
D. Update the POWERS ESPs to the most recent version available for the installed firmware
release. Update the HMCs to the most recent release available.
Answer: C

IBM   000-121 dumps   000-121   000-121

NO.5 In addition to Qshell and PASE, what other product needs to be installed on an IBM i partition
in order to remotely run scripts on an HMC?
A. IBM Portable Utilities for i
B. IBM i Integrated Server Support
C. IBM Cryptographic Service Provider
D. IBM Network Authentication Enablement for i
Answer: A

IBM자료   000-121시험문제   000-121

NO.6 A customer has purchased a new BladeCenter H (BCH) and POWER blade to run IBM i. The
POWER blade is configured with two Fibre Channel interlaces for attaching SAN and tape.
They have an IBM TS3500 tape library with a fibre channel connection, and current firmware is
running through a fibre switch to another IBM i system. One port on the existing switch and one
port in the BCH fibre switch has been zoned to provide a connection from the tape library to the
BCH.
After IBM i 7.1 SLIC and base OS are installed on the blade from IBM distribution media, the tape
library does not appear in the device configuration.
What is the most likely cause of the problem?
A. The existing switch does not support NPIV.
B. NPIV enablement was omitted when configuring the BCH switch.
C. The BCH switch configuration must match the link speed of the TS3500.
D. A switch-to-switch cable is required. A switch to device cable was shipped with the BCH by default.
Answer: A

IBM   000-121   000-121시험문제   000-121 dump

NO.7 An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i7.1
partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All
IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?
A. Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library.
B. Create a script that can be called after each backup job in a partition finishes, which will move
the fibre adapter to the next partition
C. In the HMC, select the host Power System, then select Operations - Schedule Operations -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
D. In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
Answer: B

IBM시험문제   000-121기출문제   000-121   000-121

NO.8 A customer wants two VIO Servers in the CEO of a proposed Power 720. To provide redundancy
for the IBM V7000 SAN they will utilize to provision disk for his client partitions.
What is the minimum required to make this possible?
A. A 6-disk storage backplane
B. An 8-disk storage backplane
C. A 6-disk storage backplane and the split drive bay feature
D. An 8-disk storage backplane and the split drive bay feature
Answer: C

IBM dumps   000-121최신덤프   000-121최신덤프   000-121   000-121 dump

ITExamDump의 IBM인증 000-121덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 IBM인증 000-121덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 IBM인증 000-121덤프를 구매하시면 받을수 있습니다.