IBM 000-017 최신덤프

ITExamDump의IBM인증 000-017시험덤프공부가이드 마련은 현명한 선택입니다. IBM인증 000-017덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.

ITExamDump에서는IBM 인증000-017시험대비덤프를 발췌하여 제공해드립니다. IBM 인증000-017시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인IBM 인증000-017시험대비덤프로IBM 인증000-017시험준비공부를 해보세요. 통과율이 100%입니다.

우리ITExamDump의 덤프는 여러분이IBM 000-017인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는IBM 000-017인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한IBM 000-017시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,IBM 000-017인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로IBM인증000-017험을 패스하실 수 있습니다,

시험 번호/코드: 000-017
시험 이름: IBM (Foundations of Tivoli process automation engine V7.1)

000-017 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-017.html

NO.1 A pharmaceutical company has made a tremendous number of configurations in their development
environment in order to meet their business requirements and the government regulations. The company
is ready to move 25% of these configurations into the test environment.
How should this be accomplished?
A.Export the XML and then import it again as appropriate into the test environment.
B.All of the configurations must be brought over. It is impossible to define only 25% of the configurations.
C.A package of the appropriate configurations should be defined and created. It should be distributed and
then deployed into the test environment.
D.Create a package of the appropriate configurations. Then use the Integration Framework to export
those configurations. Finally, use the Integration Framework to import the configurations into the Test
environment again.
Answer: C

IBM dump   000-017   000-017

NO.2 Which factor would normally be considered when developing a primary location hierarchy?
A.the financial relationship between locations
B.the functional relationship between locations
C.the geophysical relationship between locations
D.the organizational relationship between locations
Answer: C

IBM기출문제   000-017   000-017   000-017

NO.3 Which three workflow application actions (APPACTION) can only be used in conjunction with an
Escalation and the WFASSIGNMENT object? (Choose three.)
A.WFAUTO
B.WFCOND
C.WFREJECT
D.WFINITIATE
E.WFACCEPT
F.WFESCALATE
Answer: CEF

IBM인증   000-017자격증   000-017 pdf   000-017

NO.4 A customer wants to ensure that any data sent to the Tivoli process automation engine's Integration
Framework for retrieval of financial data into the Tivoli process automation engine can survive restarts
and failures.
Which statement is true?
A.A JMS messaging engine must be configured with a persistent data store.
B.The customer must have the persist data option set for the Integration Framework adapter.
C.It can be configured by setting a property inside the Tivoli process automation engine after installation.
D.The messages are stored local to the adapter and will survive failures without any additional
configuration.
Answer: A

IBM자료   000-017 dump   000-017기출문제   000-017 dump

NO.5 Which configuration option should be set when creating an escalation?
A.any related notifications to the escalation
B.the severity of the event that will be created
C.pager numbers in a comma-separated list in the escalation
D.the Peregrine or Remedy queue in which the escalation is placed
Answer: A

IBM최신덤프   000-017 dump   000-017 dumps

NO.6 Which method is used to validate the escalation being created?
A.Choose the Select action for Validate.
B.There is no validation of the escalation.
C.Save the escalation. Validation is automatic.
D.Click the Action button, which resembles a green check mark.
Answer: A

IBM   000-017최신덤프   000-017기출문제   000-017인증   000-017최신덤프

NO.7 When the agent saves the service request ticket, the system launches into a Service Request
Workflow process and evaluates the data on the record. If the agent has not entered asset, location, or
configuration item data, the system displays a dialog box with the following options:
Close ticket - informational call
Close ticket - unauthorized caller
Close ticket - misdirected call
Take no action
If an asset, location, or configuration item is specified on the record, the system displays a dialog box with
the following options:
Take Ownership of ticket
Assign Ownership of ticket
Create Work Order
Take no action on this ticket
Which three Nodes are used in this part of the workflow process? (Choose three.)
A.Wait
B.Input
C.Task
D.Condition
E.Interaction
F.Manual Input
Answer: DEF

IBM   000-017   000-017인증   000-017

NO.8 Which statement is true about the Conditional Expression Manager?
A.It creates and stores libraries of SQL statements.
B.It dynamically assigns a user to a Security Group based on a condition.
C.It controls workflow paths automatically when certain users are involved.
D.It creates conditions for group membership to automatically associate users into groups.
Answer: A

IBM최신덤프   000-017시험문제   000-017

NO.9 Which two types of condition can be created using the Conditional Expression Manager? (Choose
two.)
A.class
B.unique
C.universal
D.expression
E.conditional
Answer: AD

IBM   000-017   000-017   000-017   000-017

NO.10 A business requires the blocking of status changes when a work order record is in workflow, unlocking
at a certain point to perform a status change to APPR, and then relocking when the status change occurs.
Leveraging the workflow tool, what are the necessary data elements and steps to meet this requirement?
A.On the workflow connector line where the status block is to begin use the NOSTATUS action. To unlock
the status change block, prior to the next status change, on a connector line use the OKSTATUS action.
B.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line where the status block is to begin
use the NOSTATUS action. To unlock the status change block, prior to the next status change, on a
connector line use the OKSTATUS and WOAPPR actions.
C.In the Actions application, create an Action Group for the work order object with the following members
in the following order: OKSTATUS, Work Order Approval action, NOSTATUS. On the workflow connector
line where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior
to the next status change, on a connector line use the Action Group.
D.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. Create an Action Group for the work order object with the following
members in the following order: OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line
where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior to the
next status change, on a connector line use the Action Group.
Answer: C

IBM   000-017 dumps   000-017   000-017   000-017인증

NO.11 The property mxe.rmi.port can be found in maximo.properties and by the System Properties
application.
If mxe.rmi.port is set to 0 in the properties file, and is set to 1090 from the System Properties application,
which statement is true about this property?
A.This property value cannot be set to 0 in the properties file. Therefore, the value must be 1090.
B.The Tivoli process automation engine terminates with an error on startup because the two settings are
not consistent.
C.The value in the Tivoli process automation engine properties overrides the value found in the properties
file. So the property value would be 1090.
D.The value in the properties file overrides the value found when viewing Tivoli process automation
engine properties, so the property value would be 0.
Answer: D

IBM pdf   000-017   000-017   000-017   000-017

NO.12 What does the Schedule field refer to when creating an escalation?
A.the schedule by which the escalation will poll for conditions
B.the scheduled working hours of the escalation response team
C.the scheduled days of the week for which the escalation path is valid
D.a scheduled timer that is set when the condition checked by the escalation change, after which the
escalation fires
Answer: A

IBM인증   000-017 dump   000-017   000-017시험문제   000-017

NO.13 Which property must be specified in maximo.properties?
A.mxe.db.user
B.mxe.rmi.port
C.mxe.http.port
D.mxe.UserLicenseKey
Answer: A

IBM   000-017 dump   000-017시험문제   000-017인증   000-017

NO.14 A client has a workflow requirement on new asset records. Part of this requirement is that the
Contracts representatives from the Lease and Warranty groups review and validate contracts the asset
may or may not be under. The asset record cannot move to the next part of the workflow process until all
assignments are completed.
Which data elements and actions can be used to configure this part of the workflow process?
A.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when all assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an action that Leasing and Warranty Contracts
have been reviewed and this asset is under a contract. Configure the Negative connection line coming
from this Task node to indicate an action that Leasing and Warranty Contracts have been reviewed and
this asset is not under a contract.
B.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when all assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
C.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when any assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an instruction that indicates that Leasing and
Warranty Contracts have been reviewed and this asset is under a contract. Configure the Negative
connection line coming from this Task node to indicate an instruction that Leasing and Warranty Contracts
have been reviewed and this asset is not under a contract.
D.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when any assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
Answer: B

IBM   000-017 dump   000-017자격증   000-017자격증   000-017자료

NO.15 Which two data elements are required to configure a Conditional user interface Control? (Choose two.)
A.Domain
B.Person Group
C.Object Structure
D.Signature Option
E.Conditional Expression
Answer: DE

IBM   000-017   000-017

NO.16 When creating a new escalation, what is the most likely reason that the conditional SQL Expression
Builder does not list attributes to use?
A.An object has not been linked in the Applies To field.
B.The escalation has not been linked to an existing attribute.
C.The Create Condition Entry Disabled check box is selected.
D.The escalation has not been linked to an existing application.
Answer: A

IBM자료   000-017   000-017   000-017

NO.17 Which type of domain cannot have a Lookup created for it?
A.Table
B.Numeric
C.Synonym
D.Numeric Range
Answer: D

IBM   000-017   000-017   000-017시험문제   000-017인증

NO.18 Which type of domain has an internal value?
A.Table
B.Numeric
C.Synonym
D.Crossover
Answer: C

IBM시험문제   000-017   000-017

NO.19 When defining Security Groups which parameters can be specified?
A. Users, Sites, Applications and Storerooms
B. Storerooms, Group, Person and Applications
C. Users, Security, Data Restrictions and Access Rights
D. Permissions, Applications, Locations and Departments
Answer: A

IBM pdf   000-017   000-017 dumps   000-017자격증

NO.20 Which function is performed when enabling Application Server security during the installation?
A.configuring Database Server to use Application Server security
B.configuring the Tivoli process automation engine application so that it handles authorizations to use the
application
C.modifying the J2EE application so that authentication will be handled by an external source such as
IBM Tivoli Directory Server or Microsoft Active Directory
D.modifying the Tivoli process automation engine application so that authentication is handled through
the application rather than an external source such as IBM Tivoli Directory Server or Microsoft Active
Directory
Answer: C

IBM   000-017   000-017덤프   000-017자격증

ITExamDump는ITExamDump의IBM인증 000-017덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의IBM인증 000-017덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.