CheckPoint 인증한 156-315.71 덤프

IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의CheckPoint인증 156-315.71덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의CheckPoint인증 156-315.71덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의CheckPoint인증 156-315.71덤프를 데려가 주시면 기적을 안겨드릴게요.

ITExamDump의CheckPoint인증 156-315.71덤프의 인지도는 아주 높습니다. 인지도 높은 원인은CheckPoint인증 156-315.71덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의CheckPoint인증 156-315.71덤프로CheckPoint인증 156-315.71시험에 도전해보세요.

일반적으로CheckPoint인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면CheckPoint관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는CheckPoint인증156-315.71시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. CheckPoint 인증156-315.71덤프 무료샘플을 다운받아 체험해보세요.

꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. CheckPoint인증 156-315.71시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. ITExamDump의 CheckPoint인증 156-315.71덤프는CheckPoint인증 156-315.71시험에 대비한 공부자료로서 시험적중율 100%입니다.

현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로CheckPoint 156-315.71인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼CheckPoint 156-315.71인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,

시험 번호/코드: 156-315.71

시험 이름: CheckPoint (Check Point Certified Security Expert R71)

156-315.71 덤프무료샘플다운로드하기: http://www.itexamdump.com/156-315.71.html

NO.1 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint최신덤프   156-315.71기출문제   156-315.71   156-315.71

NO.2 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint   156-315.71인증   156-315.71덤프

NO.3 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint   156-315.71인증   156-315.71   156-315.71기출문제

NO.4 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint   156-315.71시험문제   156-315.71

NO.5 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint   156-315.71   156-315.71 dumps   156-315.71   156-315.71자료

NO.6 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint   156-315.71자격증   156-315.71   156-315.71인증

NO.7 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint   156-315.71최신덤프   156-315.71기출문제

NO.8 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint시험문제   156-315.71   156-315.71   156-315.71자료   156-315.71 dump

NO.9 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint자료   156-315.71   156-315.71

NO.10 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint   156-315.71   156-315.71 pdf

NO.11 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint   156-315.71   156-315.71   156-315.71

NO.12 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint   156-315.71   156-315.71시험문제   156-315.71

NO.13 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint자료   156-315.71덤프   156-315.71   156-315.71 pdf   156-315.71 pdf

NO.14 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint기출문제   156-315.71   156-315.71   156-315.71 pdf   156-315.71

NO.15 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint기출문제   156-315.71   156-315.71

NO.16 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint pdf   156-315.71 pdf   156-315.71시험문제   156-315.71자료

NO.17 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint인증   156-315.71기출문제   156-315.71   156-315.71   156-315.71기출문제

NO.18 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint시험문제   156-315.71   156-315.71인증   156-315.71   156-315.71덤프

NO.19 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint pdf   156-315.71   156-315.71 dumps   156-315.71

NO.20 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint자격증   156-315.71   156-315.71   156-315.71   156-315.71최신덤프

ITExamDump에서 제공되는CheckPoint 156-315.71인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.