도비 Microsoft 070-505-Csharp 시험

ITExamDump는 유일하게 여러분이 원하는Microsoft인증070-505-Csharp시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.

ITExamDump의 Microsoft인증 070-505-Csharp시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Microsoft인증 070-505-Csharp덤프가 신뢰성을 다시 한번 인증해주는것입니다. Microsoft인증 070-505-Csharp시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Microsoft인증 070-505-Csharp덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. Microsoft 인증070-505-Csharp덤프 무료샘플을 다운받아 체험해보세요.

아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의Microsoft인증 070-505-Csharp덤프의 도움으로 Microsoft인증 070-505-Csharp시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.

시험 번호/코드: 070-505-Csharp

시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5, Windows Forms Application Development: 70-505Csharp Exam)

070-505-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-505-Csharp.html

NO.1 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form named ConfigurationForm in the application. You add the following controls to the form. A
TabControl control named tbcConfigurationInformation along with two TabPage controls named
tabGeneralInfo and tabAdvancedSettingsA button control named btnShowAdvSettings You add the
following code segment in the form. (Line numbers are included for reference only.) 01 private void
ConfigurationForm_Load(object sender, EventArgs e)02 {03 this.btnShowAdvSettings.Click +=
new 04 EventHandler(btnShowAdvSettings_Click);05 06 }07 08 private void
btnShowAdvSettings_Click(object sender, EventArgs e)09 {10 11 } You are defining the initial
configuration and behavior of ConfigurationForm. You need to ensure that the following requirements are
met: The tabAdvancedSettings TabPage control is initially hidden when the Form is loaded.The
tabAdvancedSettings TabPage control is displayed when the btnShowAdvSettings button control is
clicked. What should you do?
A. Insert the following code segment at line 05. this.tabAdvancedSettings.Hide(); Insert the following code
segment at line 10. this.tabAdvancedSettings.Show();
B. Insert the following code segment at line 05.
tbcConfigurationInformation.TabPages.Remove(tabAdvancedSettings); Insert the following code
segment at line 10. tbcConfigurationInformation.TabPages.Add(tabAdvancedSettings);
C. Insert the following code segment at line 05.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(false); Insert the following code segment at line 10.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(true);
D. Insert the following code segment at line 05. this.tabAdvancedSettings.Invalidate(false); Insert the
following code segment at line 10. this.tabAdvancedSettings.Invalidate(true);
Answer: B

Microsoft시험문제   070-505-Csharp인증   070-505-Csharp인증   070-505-Csharp인증   070-505-Csharp

NO.2 You are creating a Windows Forms application by using the .NET Framework 3.5. The application
requires a form to display a clock. You need to create a circular form to display the clock. Which code
segment should you use?
A. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region();this.Region = reg;
B. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg
= new Region(path);this.Region = reg;
C. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region(path);this.Region = reg;
D. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region
reg = new Region();this.Region = reg;
Answer: C

Microsoft   070-505-Csharp기출문제   070-505-Csharp   070-505-Csharp인증

NO.3 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add a PrintDocument control named pntDoc to the form.
To support the print functionality, you write the following code segment in the application. (Line numbers
are included for reference only.) 01 pntDoc.BeginPrint +=
new PrintEventHandler(PrintDoc_BeginPrint);02 ...03 bool canPrint = CheckPrintAccessControl();04 if
(!canPrint) {05 06 }07 You need to ensure that the following requirements are met: When the user has
no print access, font and file stream initializations are not executed and the print operation is
cancelled.Print operations are logged whether or not the user has print access. What should you do.?
A. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new PrintEventHandler((obj, args) =>
args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
B. Add the following code segment at line 05. pntDoc.BeginPrint += new
PrintEventHandler(delegate(object obj, PrintEventArgs args){}); Add the following code segment at line
07. pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
C. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler(delegate(object
obj, PrintEventArgs args){}); Add the following code segment at line 07. pntDoc.BeginPrint -= new
PrintEventHandler((obj1, args1) => LogPrintOperation());
D. Add the following code segment at line 05. pntDoc.BeginPrint -= new PrintEventHandler((obj, args)
=> args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) =>
LogPrintOperation());
Answer: A

Microsoft dump   070-505-Csharp자격증   070-505-Csharp   070-505-Csharp

NO.4 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add 100 controls at run time in the Load event handler of the form. Users
report that the form takes a long time to get displayed. You need to improve the performance of the form.
What should you do?
A. Call the InitLayout method of the form before adding all the controls.Call the PerformLayout method of
the form after adding all the controls.
B. Call the InitLayout method of the form before adding all the controls.Call the ResumeLayout method of
the form after adding all the controls.
C. Call the SuspendLayout method of the form before adding all the controls.Call the PerformLayout
method of the form after adding all the controls.
D. Call the SuspendLayout method of the form before adding all the controls.Call the ResumeLayout
method of the form after adding all the controls.
Answer: D

Microsoft   070-505-Csharp   070-505-Csharp최신덤프

NO.5 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in the application. You add a ContextMenuStrip control named ctxMenu to the form. You have a
user-defined class named CustomControl. You write the following code segment in the application. (Line
numbers are included for reference only.) 01 CustomControl myControl = new CustomControl();02 You
need to ensure that an instance of CustomControl is displayed on the form as a top-level item of the
ctxMenu control. Which code segment should you add at line 02?
A. ToolStripControlHost host = new ToolStripControlHost(myControl);ctxMenu.Items.Add(host);
B. ToolStripPanel panel = new
ToolStripPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
C. ToolStripContentPanel panel = new
ToolStripContentPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
D. ToolStripMenuItem menuItem = new ToolStripMenuItem();ToolStripControlHost host = new
ToolStripControlHost(myControl);menuItem.DropDownItems.Add(host);ctxMenu.Items.Add(menuItem);
Answer: A

Microsoft pdf   070-505-Csharp   070-505-Csharp

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Microsoft 070-505-Csharp인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Microsoft 070-505-Csharp인증시험을 패스할 수 있다는 것을 보장합니다.