우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Microsoft인증070-536-Csharp시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며070-536-Csharp시험은 한번에 패스할 수 있는 덤프입니다.
IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Microsoft인증 070-536-Csharp덤프로Microsoft인증 070-536-Csharp시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
ITExamDump에서는 가장 최신이자 최고인Microsoft인증 070-536-Csharp시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Microsoft인증 070-536-Csharp덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Microsoft인증 070-536-Csharp시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.
Microsoft인증070-536-Csharp시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Microsoft인증070-536-Csharp시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.
시험 번호/코드: 070-536-Csharp
시험 이름: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Microsoft 070-536-Csharp인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Microsoft인증 070-536-Csharp시험을 패스하는 길에는ITExamDump의Microsoft인증 070-536-Csharp덤프가 있습니다. ITExamDump의Microsoft인증 070-536-Csharp덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.
070-536-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-536-Csharp.html
NO.1 You create a class that is derived from the Installer class. The class you create is used to perform a
component installation.
The component installation overwrites the value of a registry key. You create a method named
GetRegValue that returns the current value of the registry key.
You need to add a code segment that preserves the original value of the registry key if the component is
uninstalled.
Which code segment should you use?
A. private void BeforeUninstallEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
B. private void CommittedEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
C. public override void Uninstall(
IDictionary savedState) {
base.Uninstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
D. protected override void OnBeforeInstall(
IDictionary savedState) {
base.OnBeforeInstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
Answer: D
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp자격증
NO.2 You are creating a class named Temperature. The Temperature class contains a public field named F.
The public field F represents a temperature in degrees Fahrenheit.
You need to ensure that users can specify whether a string representation of a Temperature instance
displays the Fahrenheit value or the equivalent Celsius value.
Which code segment should you use?
A. public class Temperature : IFormattable {
public int F;
public string ToString(string format, IFormatProvider fp) {
if ((format == "F")|| (format == null)) return F.ToString();
if (format == "C") return ((F - 32) / 1.8).ToString();
throw new FormatException("Invalid format string");
}
}
B. public class Temperature : ICustomFormatter {
public int F;
public string Format(string format, object arg,
IFormatProvider fp) {
if (format == "C") return ((F - 32) / 1.8).ToString();
if (format == "F") return arg.ToString();
throw new FormatException("Invalid format string");
}
}
C. public class Temperature {
public int F;
public string ToString(string format, IFormatProvider fp) {
if (format == "C") {
return ((F - 32) / 1.8).ToString();
} else {
return this.ToString();
}
}
}
D. public class Temperature {
public int F;
protected string format;
public override String ToString() {
if (format == "C")
return ((F - 32) / 1.8).ToString();
return F.ToString();
}
}
Answer: A
Microsoft 070-536-Csharp기출문제 070-536-Csharp 070-536-Csharp
NO.3 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. public delegate int PowerDeviceOn(bool result,
DateTime autoPowerOff);
B. public delegate bool PowerDeviceOn(object sender,
EventArgs autoPowerOff);
C. public delegate void PowerDeviceOn(DateTime autoPowerOff);
D. public delegate bool PowerDeviceOn(DateTime autoPowerOff);
Answer: C
Microsoft pdf 070-536-Csharp pdf 070-536-Csharp기출문제 070-536-Csharp 070-536-Csharp
NO.4 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
public class Department {
public string name;
public string manager;
}
Each application uses a custom configuration section to store department-specific values in the
application configuration file as shown in the following code.
<Department>
<name>Hardware</name>
<manager>Amy</manager>
</Department>
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. public class deptElement : ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = ConfigurationManager.AppSettings["name"];
dept.manager =
ConfigurationManager.AppSettings["manager"];
return dept;
}
}
B. public class deptElement: ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = reader.GetAttribute("name");
dept.manager = reader.GetAttribute("manager");
}
}
C. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.SelectSingleNode("name").InnerText;
dept.manager =
section.SelectSingleNode("manager").InnerText;
return dept;
}
}
D. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.Attributes["name"].Value;
dept.manager = section.Attributes["manager"].Value;
return dept;
}
}
Answer: C
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp자료 070-536-Csharp pdf 070-536-Csharp덤프
NO.5 You need to write a code segment that will assign the name of the configuration file that the current
application domain uses to a string variable named configFile.
Which two code segments should you use to achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. AppDomain domain = AppDomain.CurrentDomain;
configFile =
domain.GetData("APP_CONFIG_FILE").ToString();
B. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = domain.SetupInformation;
configFile = setup.ConfigurationFile;
C. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = new AppDomainSetup();
configFile = setup.ConfigurationFile;
D. AppDomainSetup setup = new AppDomainSetup();
AppDomain domain = AppDomain.CreateDomain("current",
null, setup);
configFile = setup.ConfigurationFile;
Answer: AB
Microsoft최신덤프 070-536-Csharp 070-536-Csharp인증 070-536-Csharp
NO.6 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
01 public void StartService(string serverName){
02 ServiceController crtl = new
03 ServiceController("FileService");
04 if (crtl.Status == ServiceControllerStatus.Stopped){
05 }
06 }
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName;
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName;
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName;
D. Insert the following line of code between lines 04 and 05:
crtl.Continue();
E. Insert the following line of code between lines 04 and 05:
crtl.Start();
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0);
Answer: BE
Microsoft 070-536-Csharp 070-536-Csharp덤프
NO.7 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. AppDomainSetup mySetup =
AppDomain.CurrentDomain.SetupInformation;
mySetup.ShadowCopyFiles = "true";
B. System.Diagnostics.Process myProcess;
myProcess = new System.Diagnostics.Process();
C. AppDomain domain;
domain = AppDomain.CreateDomain("MyDomain");
D. System.ComponentModel.Component myComponent;
myComponent = new System.ComponentModel.Component();
Answer: C
Microsoft최신덤프 070-536-Csharp최신덤프 070-536-Csharp pdf 070-536-Csharp 070-536-Csharp
NO.8 You are developing an application that stores data about your company's sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
B. ArrayList team = new ArrayList();
team.Add("1, Hance");
team.Add("2, Jim");
team.Add("3, Hanif");
team.Add("4, Kerim");
team.Add("5, Alex");
team.Add("6, Mark");
team.Add("7, Roger");
team.Add("8, Tommy");
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
D. string[] team =
new string[] {"1, Hance",
"2, Jim", "3, Hanif",
"4, Kerim", "5, Alex",
"6, Mark", "7, Roger",
"8, Tommy"};
Answer: C
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp자료
NO.9 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D
Microsoft기출문제 070-536-Csharp자료 070-536-Csharp자격증 070-536-Csharp
NO.10 You need to write a code segment that will add a string named strConn to the connection string section
of the application configuration file.
Which code segment should you use?
A. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
myConfig.Save();
B. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
C. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
D. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.Save();
Answer: A
Microsoft 070-536-Csharp인증 070-536-Csharp 070-536-Csharp자격증
NO.11 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. public class Age {
public int Value;
public object CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(obj);
}
throw new ArgumentException("object not an Age");
}
}
B. public class Age {
public int Value;
public object CompareTo(int iValue) {
try {
return Value.CompareTo(iValue);
} catch {
throw new ArgumentException ("object not an Age");
}
}
}
C. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(_age.Value);
}
throw new ArgumentException("object not an Age");
}
}
D. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
try {
return Value.CompareTo(((Age) obj).Value);
} catch {
return -1;
}
}
}
Answer: C
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp 070-536-Csharp자료
NO.12 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
è Initialize each answer to true.
è Minimize the amount of memory used by each survey.
Which storage option should you choose?
A. BitVector32 answers = new BitVector32(1);
B. BitVector32 answers = new BitVector32(-1);
C. BitArray answers = new BitArray (1);
D. BitArray answers = new BitArray(-1);
Answer: B
Microsoft 070-536-Csharp자료 070-536-Csharp 070-536-Csharp
NO.13 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t =
new Dictionary<string, string>();
MyDictionary dictionary = (MyDictionary)t;
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp덤프 070-536-Csharp 070-536-Csharp인증 070-536-Csharp자격증
NO.14 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ThreadStart(PerformCalculation));
newThread.Start(myValues);
}
B. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
ThreadStart delStart = new
ThreadStart(PerformCalculation);
Thread newThread = new Thread(delStart);
if (newThread.IsAlive) {
newThread.Start(myValues);
}
}
C. private void PerformCalculation (CalculationValues values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Application.DoEvents();
PerformCalculation(myValues);
Application.DoEvents();
}
D. private void PerformCalculation(object values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ParameterizedThreadStart(PerformCalculation));
newThread.Start(myValues);
}
Answer: D
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp기출문제 070-536-Csharp시험문제
NO.15 You are instantiating a variable to store only strings. The variable is named messageStore.
You need to ensure that string messages are read and processed in the order in which they are received.
Which code segment should you use?
A. Stack<string> messageStore = new Stack<string>();
messageStore.Push("This is a test message...");
B. Stack messageStore = new Stack();
messageStore.Push("This is a test message...");
C. Queue messageStore = new Queue();
messageStore.Enqueue("This is a test message...");
D. Queue<string> messageStore = new Queue<string>();
messageStore.Enqueue("This is a test message...");
Answer: D
Microsoft 070-536-Csharp기출문제 070-536-Csharp 070-536-Csharp시험문제 070-536-Csharp자료
NO.16 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
Microsoft 070-536-Csharp 070-536-Csharp인증 070-536-Csharp기출문제
NO.17 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.LoadFrom(myPath);
B. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.Load(myPath);
C. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.DynamicDirectory,
"Assembly1.dll");
Assembly asm = AppDomain.CurrentDomain.Load(myPath);
D. AppDomain domain = AppDomain.CurrentDomain;
Assembly asm = domain.GetData("Assembly1.dll");
Answer: A
Microsoft dump 070-536-Csharp 070-536-Csharp 070-536-Csharp자료 070-536-Csharp시험문제
NO.18 You write the following code.
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs {
private string coverPageInfo;
public FaxArgs(string coverInfo) {
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
D. public class FaxArgs : EventArgs {
private string coverPageInfo;
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
Answer: A
Microsoft dumps 070-536-Csharp시험문제 070-536-Csharp 070-536-Csharp dump 070-536-Csharp
NO.19 You are developing a routine that will periodically perform a calculation based on regularly changing
values from legacy systems. You write the following lines of code. (Line numbers are included for
reference only.)
01 bool exitLoop = false;
02 do {
03
04 exitLoop = PerformCalculation();
05 } while (!exitLoop);
You need to write a code segment to ensure that the calculation is performed at 30-second intervals. You
must ensure that minimum processor resources are used between the calculations.
Which code segment should you insert at line 03?
A. Thread.Sleep(30000);
B. Thread.SpinWait(30000);
C. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.BelowNormal;
D. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.Lowest;
E. Thread.SpinWait(30);
Answer: A
Microsoft시험문제 070-536-Csharp pdf 070-536-Csharp 070-536-Csharp기출문제
NO.20 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
<ProjectSection name="Project1">
<role name="administrator" />
<role name="manager" />
<role name="support" />
</ProjectSection>
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. public class Role : ConfigurationElement {
internal string _ElementName = "name";
[ConfigurationProperty("role")]
public string Name {
get {
return ((string)base["role"]);
}
}
}
B. public class Role : ConfigurationElement {
internal string _ElementName = "role";
[ConfigurationProperty("name", RequiredValue = true)]
public string Name {
get {
return ((string)base["name"]);
}
}
}
C. public class Role : ConfigurationElement {
internal string _ElementName = "role";
private string _name;
[ConfigurationProperty("name")]
public string Name {
get {
return _name;
}
}
}
D. public class Role : ConfigurationElement {
internal string _ElementName = "name";
private string _name;
[ConfigurationProperty("role", RequiredValue = true)]
public string Name {
get {
return _name;
}
}
}
Answer: B
Microsoft 070-536-Csharp 070-536-Csharp자격증 070-536-Csharp 070-536-Csharp
최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 Microsoft인증 070-536-Csharp덤프는IT인증시험의 한 과목인 Microsoft인증 070-536-Csharp시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.
댓글 없음:
댓글 쓰기