2013년 10월 14일 월요일

CompTIA 자격증 SG1-001 시험덤프

영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인CompTIA인증 SG1-001시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. CompTIA인증 SG1-001시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의CompTIA인증 SG1-001덤프는 CompTIA인증 SG1-001시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.

CompTIA인증 SG1-001시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의CompTIA인증 SG1-001덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의CompTIA인증 SG1-001덤프는CompTIA인증 SG1-001실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.

CompTIA 인증 SG1-001시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는CompTIA 인증 SG1-001시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. CompTIA 인증 SG1-001시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.

시험 번호/코드: SG1-001
시험 이름: CompTIA (CompTIA Storage+ Powered by SNIA Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 310 문항
업데이트: 2013-10-13

ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.

SG1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/SG1-001.html

NO.1 Which two (2) are advantages of ISL over-subscription? (Choose two.)
A. efficient ISL bandwidth utilization
B. lowers cost-per-port per installation
C. higher performance per ISL
D. enables zoning simplicity
E. more available F_Ports
Answer: A,E

CompTIA dumps   SG1-001   SG1-001덤프

NO.2 Your customer has upgraded to faster tape technology and the backup is now taking longer. No other
changes have been made. What is a possible cause of the performance degradation?
A. tape buffer overload
B. hardware compression
C. backup server cannot sustain required throughput
D. serpentine recording changed to helical scan technology
Answer: C

CompTIA dump   SG1-001 dump   SG1-001

NO.3 After a company experienced a localized disaster, the Business Continuance Plan was reviewed. The
plan was revised to include a Recovery Time Objective (RTO) of four (4) hours and a Recovery Point
Object (RPO) of one hour. What two (2) processes must be implemented to support this requirement?
(Choose two.)
A. mirrored snapshots of data and applications
B. backup tapes recovered from offsite storage
C. data snapshots from the previous day
D. operating system and application reinstallation media
E. hot or warm site
Answer: A,E

CompTIA   SG1-001   SG1-001   SG1-001 pdf   SG1-001 dumps

NO.4 The storage administrator has a request to add more storage to support added features on an
application. Which two (2) steps must be taken for the application to recognize the added storage?
(Choose two.)
A. re-scan the SCSI bus
B. enable array re-scanning
C. configure LUN masking
D. zone the host to the subsystem port
E. increase the HBA time out value
Answer: A,C

CompTIA자료   SG1-001인증   SG1-001자료   SG1-001덤프   SG1-001 dump

NO.5 Which set of SCSI components are required to support SCSI command tag queuing?
A. adapter, adapter driver, device, device driver
B. adapter, device, device driver
C. adapter, device driver, controller, controller firmware
D. device, device driver
Answer: A

CompTIA덤프   SG1-001덤프   SG1-001인증   SG1-001 pdf

NO.6 The customer has an existing fabric switches installed from one manufacturer. They have decided to
add a redundant fabric using switches from a different manufacturer. Interoperability is their main concern.
What is important when considering interoperability in the SAN?
A. switch interoperability mode
B. HBA firmware/driver code
C. zone naming convention
D. virtualization engine
Answer: D

CompTIA   SG1-001자격증   SG1-001인증

NO.7 An application administrator seeks to improve the I/O performance of the server's SAN-attached
storage. Which HBA parameter setting change can affect the performance?
A. Queue Depth
B. PCI Connection Type
C. NL-Port Mode
D. SCSI ID Mapping
Answer: A

CompTIA   SG1-001덤프   SG1-001덤프   SG1-001최신덤프

NO.8 A server administrator notices when a specific server is re-booted its SAN storage is sometimes visible
and sometimes it is not. After examining the SAN switch logs, no FLOGI message has been received on
that port. Which HBA parameter is a most likely cause?
A. Port Link/Speed is set to Autonegotiate.
B. WWPN reset timeout is set too low.
C. R_A_TOV does not match.
D. HBA Port Type is set to "E-Port"
Answer: A

CompTIA   SG1-001시험문제   SG1-001   SG1-001인증   SG1-001

NO.9 A customer has a database server that processes a great deal of data very quickly. They have identified
a bottleneck in the storage subsystem and requested a change to the RAID configuration. How would you
configure the new RAID group? (Choose two.)
A. Stripe across 7200 rpm drives
B. Stripe across 15K rpm drives
C. RAID 6
D. RAID 1+0
E. RAID 5
Answer: B,D

CompTIA   SG1-001 dumps   SG1-001최신덤프   SG1-001   SG1-001   SG1-001

NO.10 What enables a virtual machine to have a unique World Wide Port Name?
A. Address Replacement Protocol
B. Virtual Machine Address Translation
C. N_Port ID Virtualization
D. extended WWID Architecture
Answer: C

CompTIA   SG1-001   SG1-001   SG1-001 dump   SG1-001

NO.11 The SAN audit reports that there is a single fabric in a full mesh topology. Which three (3) benefits result
from migrating to dual fabrics with full mesh topologies? (Choose three.)
A. less inter-switch links
B. simplifies manageability
C. protection from human error
D. reduction in maintenance activity
E. decreased maintenance disruption
Answer: A,C,E

CompTIA   SG1-001시험문제   SG1-001   SG1-001   SG1-001   SG1-001덤프

NO.12 University IT provides shared Fibre Channel storage services. All storage subsystems and fibre
channel switches are located in the secure campus datacenter. Each college and department provides
their own systems and staff. Central IT provides fabric, storage and backup administration. Which security
mechanism is most important in this Fibre Channel infrastructure?
A. FCPAP
B. link encryption
C. switch authentication
D. port authentication
Answer: D

CompTIA   SG1-001덤프   SG1-001 dumps   SG1-001

NO.13 You have a single fabric with four servers connecting to an edge switch in a core edge configuration with
single 2Gb/s ISLs to the core. Each server has an average throughput requirement of 40MB/s. Under
which circumstance would you need to add a second ISL?
A. to provide a redundant path
B. to avoid congestion on the ISL
C. to separate out FSPF updates
D. to provide a management path
Answer: A

CompTIA   SG1-001   SG1-001인증   SG1-001자격증

NO.14 What two (2) benefits does SCSI Command Tag Queueing provide? (Choose two.)
A. allows I/O requests to be queued to the device
B. determines the most efficient way to order & process commands
C. tags I/O requests so they can be executed first in first out
D. allows SCSI I/O throughput to equal rates of fibre channel
E. determines queue depth position
Answer: A,B

CompTIA   SG1-001   SG1-001

NO.15 A production cluster is attached to redundant disk fabrics and a tape fabric. Each cluster member has
access to twelve (12) TB of RAID 5 production storage and twelve (12) TB of RAID 0 local replica
accessed through eight HBAs single initiator zoned to sixteen storage ports on one storage subsystem.
The tape fabric includes one connection to each server and connections to four (4) 1Gb FC to SCSI
gateways connected to ten (10) LTO II (35MB/s) tape drives. The standby cluster member performs
multi-threaded backups using the local replica. All HBAs and ports are 2Gb/s. If the recovery time is equal
to backup time, where is the bottleneck?
A. Tape HBA
B. Disk HBAs
C. Tape Drives
D. FC to SCSI Gateway
Answer: A

CompTIA   SG1-001자료   SG1-001   SG1-001 dump   SG1-001자격증   SG1-001

NO.16 A storage configuration was created which stores large amounts of infrequently used documents. The
storage implementation is based on serial attached SCSI (SAS) and an edge expander. Almost all ports
are utilized, and a second edge expander will be installed. What is required to connect SATA devices to
the SAS domain?
A. SAS-SATA adapter
B. SAS-SATA protocol converter
C. cable with two SATA connectors
D. cable with a SAS and a SATA connector
Answer: C

CompTIA   SG1-001   SG1-001 dump   SG1-001인증   SG1-001   SG1-001

NO.17 Last month, you successfully merged two (2) local SAN islands into a single core/edge fabric topology
and connected storage devices to the core switches. Performance benchmarks were met or exceeded. In
recent days, server administrators have documented a slow down in performance as I/O demands have
increased. Storage administrators report that all storage ports are under-utilized. What is the most likely
explanation?
A. conflicts between SAN routing protocols
B. storage port buffer credit limits have restricted I/O capabilities
C. multiple process login failures
D. over utilization of one or more ISLs
Answer: D

CompTIA   SG1-001   SG1-001   SG1-001 pdf   SG1-001자료   SG1-001 pdf

NO.18 A two fabric merge has failed leaving you with segmented fabrics. Which could be the the cause of the
segmented fabrics?
A. unique domain Ids
B. identical zone names
C. timeouts set to equal values
D. non-compatible interoperability modes
Answer: B

CompTIA   SG1-001인증   SG1-001   SG1-001덤프   SG1-001자료

NO.19 You are the system administrator of a medium-sized manufacturing company. The chief executive
officer (CEO) is concerned about business continuity in case of a disaster. He constituted a project team
to develop a business continuity and disaster recovery solution. The team is discussing online backup
strategies. What affects time-to-create and incremental update of a copy-on-write snapshot?
A. number of files
B. number of LUNs
C. size of snap volume
D. size of LUN
Answer: D

CompTIA자격증   SG1-001   SG1-001   SG1-001자격증   SG1-001

NO.20 Two servers have been connected to a SAN with redundant fabrics and the zone configuration needs to
be changed. How can you safely change the zone configuration?
A. Save the current zone configuration to disk, modify it and apply it to both fabrics simultaneously to
avoid segmentation.
B. Modify the zone configuration on one fabric, test it, and then modify the zone configuration on the
second fabric.
C. Modify the zone configuration on one fabric, test it, and then copy the zone configuration to the second
fabric.
D. Modify the zone configuration on both fabrics at the same time, enable them simultaneously to avoid
segmentation.
Answer: B

CompTIA   SG1-001   SG1-001 dump

ITexamdump의 000-585덤프의 VCE테스트프로그램과 70-342덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-318시험에 대비한 고품질 덤프와 70-484시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N42시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/SG1-001.html

댓글 없음:

댓글 쓰기