2014년 4월 18일 금요일

Network Appliance NS0-502 덤프자료

우리ITExamDump 사이트에서Network Appliance NS0-502관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.

Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Network Appliance인증NS0-502시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.

ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.

시험 번호/코드: NS0-502
시험 이름: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 106 문항
업데이트: 2014-04-17

ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Network Appliance NS0-502인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Network Appliance NS0-502관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Network Appliance NS0-502자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Network Appliance NS0-502인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.

지금 같은 경쟁력이 심각한 상황에서Network Appliance NS0-502시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.Network Appliance NS0-502시험자격증 소지자들의 연봉은 당연히Network Appliance NS0-502시험자격증이 없는 분들보다 높습니다. 하지만 문제는Network Appliance NS0-502시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.

ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.

NS0-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-502.html

NO.1 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance dumps   NS0-502시험문제   NS0-502최신덤프   NS0-502

NO.2 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance   NS0-502   NS0-502 pdf   NS0-502

NO.3 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502 dumps   NS0-502인증

NO.4 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance인증   NS0-502   NS0-502   NS0-502

NO.5 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance덤프   NS0-502   NS0-502자격증   NS0-502 dumps

NO.6 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance pdf   NS0-502시험문제   NS0-502최신덤프   NS0-502   NS0-502최신덤프

NO.7 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

Network Appliance자료   NS0-502   NS0-502

NO.8 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance   NS0-502   NS0-502   NS0-502

NO.9 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance dump   NS0-502   NS0-502   NS0-502   NS0-502시험문제

NO.10 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance시험문제   NS0-502 dump   NS0-502 pdf   NS0-502자격증   NS0-502   NS0-502

NO.11 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance   NS0-502   NS0-502   NS0-502자격증   NS0-502인증

NO.12 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502

NO.13 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance   NS0-502최신덤프   NS0-502자격증

NO.14 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance pdf   NS0-502덤프   NS0-502최신덤프   NS0-502시험문제   NS0-502자격증

NO.15 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   NS0-502   NS0-502기출문제   NS0-502 pdf

NO.16 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance기출문제   NS0-502   NS0-502   NS0-502 dump   NS0-502 pdf

NO.17 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance   NS0-502인증   NS0-502

NO.18 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance최신덤프   NS0-502기출문제   NS0-502자료   NS0-502   NS0-502   NS0-502 dump

NO.19 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance   NS0-502   NS0-502   NS0-502최신덤프   NS0-502 dump

NO.20 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance dump   NS0-502   NS0-502   NS0-502

ITexamdump의 MB6-869덤프의 VCE테스트프로그램과 74-409덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-694시험에 대비한 고품질 덤프와 1Z0-807시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-533시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/NS0-502.html

댓글 없음:

댓글 쓰기