ITExamDump에서는 전문Juniper JN0-343인증시험을 겨냥한 덤프 즉 문제와 답을 제공합니다.여러분이 처음Juniper JN0-343인증시험준비라면 아주 좋은 덤프입니다. ITExamDump에서 제공되는 덤프는 모두 실제시험과 아주 유사한 덤프들입니다.Juniper JN0-343인증시험패스는 보장합니다. 만약 떨어지셨다면 우리는 덤프비용전액을 환불해드립니다.
지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해Juniper 인증JN0-343시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.
IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는Juniper인증 JN0-343인증시험에 대비한 고품질 덤프를 연구제작하였습니다. Juniper인증 JN0-343시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.
우리 ITExamDump에서는 최고이자 최신의Juniper 인증JN0-343덤프자료를 제공 함으로 여러분을 도와Juniper 인증JN0-343인증자격증을 쉽게 취득할 수 있게 해드립니다.만약 아직도Juniper 인증JN0-343시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴수 있습니다.
ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.
빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Juniper JN0-343인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
시험 번호/코드: JN0-343
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 393 문항
업데이트: 2013-12-29
우리ITExamDump 에서 여러분은 아주 간단히Juniper JN0-343시험을 패스할 수 있습니다. 만약 처음Juniper JN0-343시험에 도전한다면 우리의Juniper JN0-343시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게Juniper JN0-343시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의Juniper JN0-343자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.Juniper JN0-343로 빠른시일내에 자격증 취득하시고JuniperIT업계중에 엘리트한 전문가되시기를 바랍니다.
JN0-343 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-343.html
NO.1 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper덤프 JN0-343시험문제 JN0-343시험문제 JN0-343 JN0-343
NO.2 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343 JN0-343 dumps JN0-343 JN0-343기출문제
NO.3 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper기출문제 JN0-343 pdf JN0-343최신덤프 JN0-343 JN0-343
NO.4 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper dump JN0-343시험문제 JN0-343최신덤프 JN0-343인증
NO.5 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343 JN0-343 JN0-343자격증 JN0-343 dumps
NO.6 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper기출문제 JN0-343 JN0-343 JN0-343
NO.7 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper인증 JN0-343 JN0-343최신덤프 JN0-343 dump JN0-343시험문제
NO.8 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343 JN0-343시험문제 JN0-343자료
NO.9 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper자격증 JN0-343 JN0-343자격증 JN0-343자격증 JN0-343
NO.10 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 JN0-343시험문제 JN0-343자격증
NO.11 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper pdf JN0-343인증 JN0-343
NO.12 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper시험문제 JN0-343 dump JN0-343자료 JN0-343시험문제 JN0-343최신덤프
NO.13 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper dump JN0-343 JN0-343인증
NO.14 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper dump JN0-343 JN0-343자료 JN0-343시험문제
NO.15 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper덤프 JN0-343 pdf JN0-343 JN0-343
NO.16 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper시험문제 JN0-343 JN0-343 dump JN0-343최신덤프 JN0-343 dump
NO.17 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343시험문제 JN0-343 JN0-343
NO.18 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343덤프 JN0-343
NO.19 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper기출문제 JN0-343 JN0-343 JN0-343기출문제
NO.20 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper dumps JN0-343 JN0-343 JN0-343 pdf
NO.21 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper dump JN0-343 JN0-343 JN0-343최신덤프 JN0-343인증
NO.22 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper JN0-343 JN0-343 pdf JN0-343 JN0-343
NO.23 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper시험문제 JN0-343 JN0-343최신덤프 JN0-343인증 JN0-343 JN0-343
NO.24 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper덤프 JN0-343 pdf JN0-343 dump JN0-343 dump
NO.25 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper최신덤프 JN0-343 dumps JN0-343최신덤프 JN0-343 dumps
NO.26 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper dumps JN0-343 pdf JN0-343
NO.27 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper자격증 JN0-343 dump JN0-343
NO.28 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper기출문제 JN0-343시험문제 JN0-343인증
NO.29 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 dumps JN0-343 JN0-343
NO.30 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343인증 JN0-343 JN0-343 dump JN0-343 JN0-343
ITexamdump의 VCP5-DCV덤프의 VCE테스트프로그램과 HP2-T23덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TADM51_70시험에 대비한 고품질 덤프와 HP5-K01D시험 최신버전덤프를 제공해드립니다. 최고품질 C_TFIN52_64시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기